Oscam a jeho nastavenie (s popisom - testovane v E2)

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 10:12

http://tekreaders.com/blog/oscam-windows/

http://oscam.ump2002.net/board/thread.p ... =0&page=11

a aky valentinko? ten okaz co si dal je na moj prispevok
tam som myslel ze je problem v citacke, ale zjavne je v oscame, resp. v jeho nastaveni kedze NewCS mi frci v pohode

baro · Příspěvek od **baro** » 31.březen 2011 - 10:43

bbedo2 píše:http://tekreaders.com/blog/oscam-windows/

http://oscam.ump2002.net/board/thread.p ... =0&page=11

a aky valentinko? ten okaz co si dal je na moj prispevok
tam som myslel ze je problem v citacke, ale zjavne je v oscame, resp. v jeho nastaveni kedze NewCS mi frci v pohode

sorry, ospravedlnujem sa

to bude tym, ze rozmyslam aj nad robotou
ale za tym cygwin-om si stojim, testovane sice len na troch PC (wxp-pro/whp-home), ale spravanie bolo rovnake
newcs pouzivas priamo pre win, alebo mas nejaku verziu pre cygwin?

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 10:51

priznam sa ze neviem co je cygwin
tu je NewCS ktore mi frci s phoenix

http://jany.ic.cz/download/newcs-wincsc.zip

a takyto mam config:

<newCSconfig>
<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>COM3</node>
<reset>normal</reset>
<export>1</export>
<enabled>1</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxid>0000000000</boxid>
<crypto-special>Yes</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10010</newcamd_port>
<pincode>0000</pincode>
</device>
</readers>
<xmlserver>
<enabled>0</enabled>
<port>11012</port>
<allow>ALL</allow>
<administrator>Master</administrator>
<password>123456</password>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
<port>11011</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>

<httpd>
<server>
<port>11013</port>
<enabled>Yes</enabled>
</server>
<user>
<name>admin</name>
<password>1234</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>

<debug>
<level>normal</level>
<type>all</type>
<output>all</output>
<logfile>tmp/log.txt</logfile>
<console_options>all</console_options>
<file_options>normal,all</file_options>

</debug>
<newcamdserver>
<enabled>1</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile>tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>

baro · Příspěvek od **baro** » 31.březen 2011 - 11:17

bbedo2 píše:priznam sa ze neviem co je cygwin

predpokladal som ze ked pouzivas oscam-cygwin-svn-48xx.zip a k ich spusteniu potrebujes Cygwin Dlls for Oscam, ze to budes vediet, ale moja chyba, nemam predpokladat
no nic, vsetci sa ucime, aj mna by zaujimalo, ci je chyba v oscame, alebo v cygwine
zatial je bud vhodnejsie pouzit linux, alebo pre win si postavit citacku na novsich usb<>serial prevodnikoch, podporujucich USB2.0

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 11:23

no ja to viac menej iba testujem
a kedze v linuxe nie som ani nahodou doma tak len takto
ale ak by si vedel o nejakom navode ako spojazdit linux bol by som povdacny
najzaujimavejsie by bolo pre mna nainstalovat linux do VMware, ta pozna aj USB
ale nemam vela casu hladat po nete, kazdpadne keby ze je laicky navod tak to skusim
budem mat k dispozicii aj asus na testnutie takze tam to skusim tiez, to to budu obavy ze ho nejako odpalim

Surtep · Příspěvek od **Surtep** » 31.březen 2011 - 11:50

Tak sem to testnul a beha to taky ale linux je linux

2011/03/31 11:38:16 711A90 c inetbox300s (0D03&000004/1F43/9C:F060): found (335 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:20 632E48 r inetbox300s emmtype=global, len=47, idx=1, cnt=1: written (126 ms) by internal_windows
2011/03/31 11:38:25 711A90 c inetbox300s (0D03&000004/1F43/9C:DBE2): found (335 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:25 632E48 r inetbox300s emmtype=global, len=46, idx=3, cnt=1: written (114 ms) by internal_windows
2011/03/31 11:38:30 632E48 r inetbox300s emmtype=global, len=49, idx=7, cnt=1: written (120 ms) by internal_windows
2011/03/31 11:38:35 711A90 c inetbox300s (0D03&000004/1F43/9C:0530): found (344 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:35 632E48 r inetbox300s emmtype=global, len=52, idx=9, cnt=1: written (123 ms) by internal_windows
2011/03/31 11:38:40 632E48 r inetbox300s emmtype=global, len=47, idx=11, cnt=1: written (116 ms) by internal_windows

tady to mate ALL-IN-ONE $\:D/$

http://www.ab-forum.info/viewtopic.php? ... 46#p312546

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 12:15

vecer vyskusam
ale velke rozdiely tam nevidim
este podotykam ze mam dvojcitacku od ZDK ktora je v mode phoenix a frekvencia je nastavena na 3xxx nie 6 MHz
ty tam mas v nasatveniach 600 aj 3xx, tomu nastaveniu velmi nechapem ani z popisu
ale nic jednoduchsie nie je ako to vyskusat
ak mas tau istu citacku nepise ti tam ze ju spusta v deprecated mode?

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 12:23

napadlo ma pustit to mozem aj na dialku ale prijmac doma nezapnem

kazdopadne zaciatok je taky isty, uz aj pomale nacitavanie karty znaci ze to nepojde oka

2011/03/31 12:12:10 A0F0D0 r internal_windows card detected
2011/03/31 12:12:14 A0F0D0 r ATR: xxx
2011/03/31 12:12:17 A0F0D0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/03/31 12:12:18 A0F0D0 r [cryptoworks-reader] card detected
2011/03/31 12:12:18 A0F0D0 r [cryptoworks-reader] type: CryptoWorks
2011/03/31 12:12:21 A0F0D0 r card system not supported
2011/03/31 12:12:21 A0F0D0 r Normal mode failed, reverting to Deprecated Mode
2011/03/31 12:12:25 A0F0D0 r ATR: xxxxx
2011/03/31 12:12:26 A0F0D0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/03/31 12:12:27 A0F0D0 r [cryptoworks-reader] card detected
2011/03/31 12:12:27 A0F0D0 r [cryptoworks-reader] type: CryptoWorks
2011/03/31 12:12:31 A0F0D0 r type: CryptoWorks, caid: 0D03, ascii serial: 285339500, hex serial: xxx
2011/03/31 12:12:33 A0F0D0 r issuer: Trade&Technology, id: 04, bios: v3, pin: unknown, mfid: 3F50
2011/03/31 12:12:33 A0F0D0 r providers: 2 (04,08)
2011/03/31 12:12:33 A0F0D0 r found cardsystem cryptoworks
2011/03/31 12:12:34 A0F0D0 r provider: 1, id: 04, name: T&T SMS I

Surtep · Příspěvek od **Surtep** » 31.březen 2011 - 12:42

Deprecated je "nedoporuceny" nebo doslova "zavrhovany"

Prakticky se to pouziva, kdyz nekdo udela nekompatibilni zmenu, napr. odebere nejakou funkci/property a nechce, aby ji uz nekdo pouzival, ale prida tam alibisticke reseni pro ty, kdo tu funkci pouzivali a nehodlaji si ji odeprit... (unas tedy cr******s-readercard)

Kartu to cte a to o 1/3 rychleji a problem co tu resite se tyka pouze a jen cygwin knihoven ktere mate stare a pomale

rychlos prvotniho nacteni karty zalezi taky na procesech co ti bezi ve Win ty se podileji na celkovem vysledku a rychlosti proto a jedine LINUX

proto sem to udelal all - in a povazuji OSCAM ve Win za vyreseny

Mate internet tak

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 12:53

co je deprecated to tu vieme
ja hladam riesenie co treba nastavit aby to islo oka
5 rokov stary NewCS to zvlada a 3 dnovy oscam nie?
tomu sa mi nechce verit
vo windowsoch problem nie je, su ciste ako lalia

btw: prosim, to v kazdom prispevku musis spomynat linux? kzdy vie ze linux je linux a nie nieco ine...

Surtep · Příspěvek od **Surtep** » 31.březen 2011 - 13:07

Pokud me to chodi a ty jsi pouzil stejny nastaveni co jsem poslal tak se pokus najit vlastni odpoved kde mas chyba.
-ja hladam riesenie co treba nastavit aby to islo oka
nastaveno a dal sem ti i odkaz na komplet a chodito
- 5 rokov stary NewCS to zvlada a 3 dnovy oscam nie?
Prosimte a co napriklad nezvladne ?
- tomu sa mi nechce verit
Cemu neveris ?

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 13:18

chodi to aj mne ale pomaly
a vylucovacia metoda ked to ide v newcs okej takze citacka a ani windows na chybe nebudu
takze jedine oscam
mozno ty mas citacku inu (novsiu USB 2.0), no tu moju oscam (win verzia) nezvlada... mozno ina win verzia to zvlada, len ich je skoro 5000 a kazdu skusit je fakt o drzku
vsak na jedej mi ide cccamd a na inej nie (setting ten isty)
alebo normalne frci pcsc a zrazu na 100 verzii ani paru a potom zase frci
maju v tom hokej

baro · Příspěvek od **baro** » 31.březen 2011 - 17:42

Surtep píše:Tak sem to testnul a beha to taky ale linux je linux

2011/03/31 11:38:16 711A90 c inetbox300s (0D03&000004/1F43/9C:F060): found (335 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:20 632E48 r inetbox300s emmtype=global, len=47, idx=1, cnt=1: written (126 ms) by internal_windows
2011/03/31 11:38:25 711A90 c inetbox300s (0D03&000004/1F43/9C:DBE2): found (335 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:25 632E48 r inetbox300s emmtype=global, len=46, idx=3, cnt=1: written (114 ms) by internal_windows
2011/03/31 11:38:30 632E48 r inetbox300s emmtype=global, len=49, idx=7, cnt=1: written (120 ms) by internal_windows
2011/03/31 11:38:35 711A90 c inetbox300s (0D03&000004/1F43/9C:0530): found (344 ms) by internal_windows (of 1 avail 1) - CT1 / STV2
2011/03/31 11:38:35 632E48 r inetbox300s emmtype=global, len=52, idx=9, cnt=1: written (123 ms) by internal_windows
2011/03/31 11:38:40 632E48 r inetbox300s emmtype=global, len=47, idx=11, cnt=1: written (116 ms) by internal_windows

tady to mate ALL-IN-ONE $\:D/$

http://www.ab-forum.info/viewtopic.php? ... 46#p312546

pekne, a prezradis nam aj co ti "viselo" na ttyS0?
u mna to totiz vyzera takto:
1.
2011/03/31 16:36:28 5F8190 s creating thread for device /dev/ttyS2 (2xusb, nieco ako od ZDK)
2011/03/31 16:36:28 632CC8 r reader thread started (thread= 632CC8, label=internal_windows, device=/dev/ttyS2, detect=cd, mhz=600, cardmhz=357)
...
2011/03/31 16:39:02 6CF088 c client connected to 16001 port
2011/03/31 16:39:03 6CF088 c encrypted newcamd:16001-client 172.28.100.99 granted (inetbox300s, au=auto (1 reader))
2011/03/31 16:39:03 6CF088 c user inetbox300s authenticated successfully (mgcamd)
2011/03/31 16:39:03 6CF088 c AU enabled for user inetbox300s on reader internal_windows
2011/03/31 16:39:05 6CF088 c inetbox300s (0D70&000004/13AB/80:A164): found (2469 ms) by internal_windows (of 1 avail 1) - 0D70:13AB unknown
2011/03/31 16:39:07 632CC8 r inetbox300s emmtype=shared, len=104, idx=0, cnt=1: written (1547 ms) by internal_windows
...
2011/03/31 16:39:42 632CC8 r inetbox300s emmtype=global, len=44, idx=16, cnt=1: written (750 ms) by internal_windows
2011/03/31 16:39:46 6CF088 c inetbox300s (0D70&000004/13AB/80:20F6): found (4000 ms) by internal_windows (of 1 avail 1) - 0D70:13AB unknown
...
2011/03/31 16:40:05 6CF088 c inetbox300s (0D70&000004/1F41/A5:FBF6): not found (2718 ms) by internal_windows (of 1 avail 1) - 0D70:1F41 unknown
2011/03/31 16:40:10 6CF088 c inetbox300s (0D70&000004/1F41/80:FB02): found (4891 ms) by internal_windows (of 1 avail 1) - 0D70:1F41 unknown
2011/03/31 16:40:15 6CF088 c inetbox300s (0D70&000004/1F41/80:8546): found (2468 ms) by internal_windows (of 1 avail 1) - 0D70:1F41 unknown
2011/03/31 16:40:17 6CF088 c inetbox300s (0D70&000004/1F41/80:8546): cache1 (125 ms) by internal_windows (of 1 avail 1) - 0D70:1F41 unknown
2011/03/31 16:40:22 6CF088 c inetbox300s (0D70&000004/1F41/80:8546): cache1 (125 ms) by internal_windows (of 1 avail 1) - 0D70:1F41 unknown
2011/03/31 16:40:31 6CF088 c inetbox300s (0D70&000004/1F44/7C:A778): not found (3234 ms) by internal_windows (of 1 avail 1) - 0D70:1F44 unknown
2011/03/31 16:40:35 6CF088 c inetbox300s (0D70&000004/1F44/71:90E1): found (3984 ms) by internal_windows (of 1 avail 1) - 0D70:1F44 unknown
2011/03/31 16:40:39 6CF088 c inetbox300s (0D70&000004/1F44/71:A595): found (3172 ms) by internal_windows (of 1 avail 1) - 0D70:1F44 unknown
2.
2011/03/31 17:02:33 5F8190 s creating thread for device /dev/ttyS0 (1xserial, nieco ako Phoenix)
2011/03/31 17:02:33 632CC8 r reader thread started (thread= 632CC8, label=internal_windows, device=/dev/ttyS0, detect=cd, mhz=600, cardmhz=357)
...
2011/03/31 17:03:08 632CC8 r [cryptoworks-reader] ready for requests
2011/03/31 17:03:31 6CFB28 c inetbox300s (0D70&000004/13AB/80:619A): found (328 ms) by internal_windows (of 1 avail 1) - 0D70:13AB unknown
2011/03/31 17:03:32 6CFB28 c inetbox300s (0D70&000004/13AB/80:41B9): found (328 ms) by internal_windows (of 1 avail 1) - 0D70:13AB unknown
...
2011/03/31 17:04:32 6CFB28 c inetbox300s (0D70&000004/13A6/80:48D3): found (328 ms) by internal_windows (of 1 avail 1) - 0D70:13A6 unknown
2011/03/31 17:04:42 6CFB28 c inetbox300s (0D70&000004/13A6/80:E8A7): found (328 ms) by internal_windows (of 1 avail 1) - 0D70:13A6 unknown
2011/03/31 17:04:46 632C40 h Shutdown requested by WebIF from 127.0.0.1
2011/03/31 17:04:46 632C40 h exit oscam requested
2011/03/31 17:04:46 632C40 h HTTP Server: Shutdown requested from 127.0.0.1
zial log z usb2.0 citacky nemozem dat, bo ju testuje iny clen tohto fora

a dalsia je v stave rozpracovanosti
logy z USB2 citacky (FT4232H)
2011/04/11 17:16:03 66BBC8 c inetbox300s (0D70&000004/1F42/80:89C6): found (344 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:03 66BBC8 c inetbox300s (0D70&000004/1F42/80:C5BB): found (328 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:13 66BBC8 c inetbox300s (0D70&000004/1F42/80:2AF0): found (343 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:23 66BBC8 c inetbox300s (0D70&000004/1F42/80:9E4C): found (343 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:33 66BBC8 c inetbox300s (0D70&000004/1F42/80:297B): found (343 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:43 66BBC8 c inetbox300s (0D70&000004/1F42/80:7CAF): found (343 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:16:53 66BBC8 c inetbox300s (0D70&000004/1F42/80:A65C): found (343 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown
2011/04/11 17:17:03 66BBC8 c inetbox300s (0D70&000004/1F42/80:14A0): found (360 ms) by cr1 (of 1 avail 1) - 0D70:1F42 unknown

casy porovnatelne s hw seriovym portom...
dalo by sa aj na win

konfigy boli upravene na 0D70:000004, doplnene o newcamd
bars windowsak, suhlasim s tebou, linux je linux

alfsvk · Příspěvek od **alfsvk** » 31.březen 2011 - 17:59

Ono sa s tym snad ani neoplati zapodievat..na /dev/ttyS0 original ZDK
2011/03/31 17:36:57 667480 c inetbox300s (0D03&000004/1F41/A5:3F3B): found (3090 ms) by internal_windows (of 1 avail 1) - TV Markíza
2011/03/31 17:36:59 65F1B8 r inetbox300s emmtype=global, len=49, idx=42, cnt=1: written (828 ms) by internal_windows
2011/03/31 17:37:04 65F1B8 r inetbox300s emmtype=global, len=52, idx=44, cnt=1: written (844 ms) by internal_windows
2011/03/31 17:37:07 667480 c inetbox300s (0D03&000004/1F41/A5:94E2): found (3082 ms) by internal_windows (of 1 avail 1) - TV Markíza
2011/03/31 17:37:09 65F1B8 r inetbox300s emmtype=global, len=47, idx=46, cnt=1: written (782 ms) by internal_windows
2011/03/31 17:37:15 65F1B8 r inetbox300s emmtype=global, len=54, idx=48, cnt=1: written (875 ms) by internal_windows
2011/03/31 17:37:18 667480 c inetbox300s (0D03&000004/1F41/A5:3F56): found (3395 ms) by internal_windows (of 1 avail 1) - TV Markíza
2011/03/31 17:37:20 65F1B8 r inetbox300s emmtype=global, len=49, idx=50, cnt=1: written (812 ms) by internal_windows
2011/03/31 17:37:25 65F1B8 r inetbox300s emmtype=global, len=49, idx=53, cnt=1: written (813 ms) by internal_windows
2011/03/31 17:37:28 667480 c inetbox300s (0D03&000004/13A6/9C:26C5): found (2973 ms) by internal_windows (of 1 avail 1) - JOJ
2011/03/31 17:37:30 65F1B8 r inetbox300s emmtype=global, len=44, idx=55, cnt=1: written (750 ms) by internal_windows
2011/03/31 17:37:34 65F1B8 r inetbox300s emmtype=global, len=44, idx=56, cnt=1: written (738 ms) by internal_windows
2011/03/31 17:37:37 667480 c inetbox300s (0D03&000004/13A6/9C:5DFF): found (2938 ms) by internal_windows (of 1 avail 1) - JOJ
2011/03/31 17:37:39 65F1B8 r inetbox300s emmtype=global, len=48, idx=2, cnt=2: written (796 ms) by internal_windows
2011/03/31 17:37:44 65F1B8 r inetbox300s emmtype=global, len=49, idx=4, cnt=2: written (797 ms) by internal_windows
2011/03/31 17:37:47 667480 c inetbox300s (0D03&000004/13A6/9C:E8E3): found (2958 ms) by internal_windows (of 1 avail 1) - JOJ

Na ASUSe, pripadne na vu DUO su casy na tom istom gerete max do 150ms.

Cize WIN.. je vhodny na riadenie procesov v realnom case akorad tak na ovladanie ponorky v ktorej sedi osoba bez spiatocneho listka..

PS: test s ICE /0D96 - cas o cca 20-50 ms horsi..

baro · Příspěvek od **baro** » 31.březen 2011 - 18:15

alfsvk píše:Cize WIN.. je vhodny na riadenie procesov v realnom case akorad tak na ovladanie ponorky v ktorej sedi osoba bez spiatocneho listka..

Lenze Oscam nie je win aplikacia!
http://www.cygwin.com/
http://en.wikipedia.org/wiki/Cygwin
Takze kritika by skor mala ist na adresu tvorcov oscamu, ze nevytvorili cistu win portaciu (pripadne aj na cygwin), ze spolu nevedia pouzivat virtualne com porty, bo na hw com porte ide, rovnako ako newcs.
Nechcem tu vyvolavat flame na temu win/unixlike, ale celkom by mi na obcasne testy bodlo, keby bol aj cisty win oscam, nemajuc ice, pouzivam newcs.

alfsvk · Příspěvek od **alfsvk** » 31.březen 2011 - 18:19

jj prikladom je uvadzany newcs, ten vyportovali aj pre WIN a da sa s nim..
Ono je to sposobene tym emu-prostredim Linuxu vo WIN, ale potesi to aj tak, na overenie funkcnosti staci..

To nebola kritika, skor konstatovanie stavu..

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 18:53

date mi niekto konfig pre newcs 1.65 alebo ak jesto novsi lebo tam sa mi nedari rozchodit 0d03

baro · Příspěvek od **baro** » 31.březen 2011 - 19:08

bbedo2 píše:date mi niekto konfig pre newcs 1.65 alebo ak jesto novsi lebo tam sa mi nedari rozchodit 0d03

tu http://www.ab-forum.info/viewtopic.php?p=312531#p312531 pises, ze ti to frci a teraz ze ti nejde 0d03
konfig newcs nepotrebuje caid, presnejsie tu: http://www.ab-forum.info/viewtopic.php?p=152280#p152280

bodlo by blizsie info:
co chces vlastne urobit?
preco server na win pc?
kto bude jeho klient (box/emu)?

bbedo2 · Příspěvek od **bbedo2** » 31.březen 2011 - 20:33

jo, ale niekde som aj pisal ze mi to ide na starsej verzii newcs a nie na tej najnovsej (asi rok starej) co som nasiel
ale mozno to mam popletene a vobec som to nespomenul

vo windowsoch som doma preto to tam testujem
potom ked to pojde skusim sa pustit do linuxu, asi asus

Surtep · Příspěvek od **Surtep** » 31.březen 2011 - 23:38

baro píše: pekne, a prezradis nam aj co ti "viselo" na ttyS0?

Takova stara hracka z roku 2000

smartmouse2000

Nejen ze v jednoduchosti je krasa ,ale vona to bude i rychlost

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)